Summer Daze

June 30th, 2007 § Leave a Comment

Ode to summer weekends in Los Angeles. Picture of The iconic Case Study House #22 designed by Pierre Koenig. Link back to Flicker

Gorgeous outdoor fireplace Peck Residence, Here’s a link back to Flicker

Summer Daze

June 30th, 2007 § Leave a Comment

Ode to summer weekends in Los Angeles. Picture of The iconic Case Study House #22 designed by Pierre Koenig. Link back to Flicker

Gorgeous outdoor fireplace Peck Residence, Here’s a link back to Flicker

Coining a phrase

June 22nd, 2007 § 2 Comments

I was having a conversation yesterday with a client about a particular design aesthetic where by styles are co mingled: old world and modern technology. This seems to be what many consumers are after. Manufacturer’s are attuned to this. came a cross Grohe’s new product , Relaxa Rustic, where by they coin the phrase ‘Ameropean’ – the point where modern European design and engineering meets the authenticity and classic styling of American interiors. I like it.

Corner Cabinets: A reason not to have one.

June 21st, 2007 § 4 Comments

Corner cabinets: When faced with an option of using a corner for storage or voiding the corner, evaluate what can be gained without one. This kitchen would have lost it’s impact, the hood would have to be moved over possibly, and the drawers would lost the balance this massive hood needs.

This gorgeous kitchen remodeled by Downsview Kitchens, for the 2007 American Red Cross Designers’ Show House, West Palm Beach, Florida, and featured in the July-August issue of Veranda Magazine, is designed with a voided corner . The impact in the design is the curvaceous hood, the molding, the simplicity of the drawers. It is the use of drawers instead of a typical corner storage cabinet that makes a case for voiding the corner in favor of symmetry and balance.

This kitchen would have looked off balanced had they used a lazy susan corner cabinet. I like the balance of the 3 drawers shown both left and right of the range. They are a good width, looks like they could be 18 or 21 wide. I don’t like using drawers that are too narrow. The designer used shallow depth glass fronted bin drawers; great impact below the window. Love the use of the wood butcher block surface. I also like the wall to the right of the hood. Painted niche style open decorative display with tile accents. This is beautiful.


Now for what I don’t like: for a hood this size, I would have expected at least a 36” range. But then the drawers would have to be reduced in width. This seems a typical problem for most homeowners: bigger appliances or better storage. Also note the glass cook top is not level in the back left corner. Not much else to critique. I really like this space! Bravo to Kitchen Designer Sean Daigle. Also to Monica Brent who skillfully painted the hood. Gorgeous!

Corner Cabinets: A reason not to have one.

June 21st, 2007 § 4 Comments

Corner cabinets: When faced with an option of using a corner for storage or voiding the corner, evaluate what can be gained without one. This kitchen would have lost it’s impact, the hood would have to be moved over possibly, and the drawers would lost the balance this massive hood needs.

This gorgeous kitchen remodeled by Downsview Kitchens, for the 2007 American Red Cross Designers’ Show House, West Palm Beach, Florida, and featured in the July-August issue of Veranda Magazine, is designed with a voided corner . The impact in the design is the curvaceous hood, the molding, the simplicity of the drawers. It is the use of drawers instead of a typical corner storage cabinet that makes a case for voiding the corner in favor of symmetry and balance.

This kitchen would have looked off balanced had they used a lazy susan corner cabinet. I like the balance of the 3 drawers shown both left and right of the range. They are a good width, looks like they could be 18 or 21 wide. I don’t like using drawers that are too narrow. The designer used shallow depth glass fronted bin drawers; great impact below the window. Love the use of the wood butcher block surface. I also like the wall to the right of the hood. Painted niche style open decorative display with tile accents. This is beautiful.


Now for what I don’t like: for a hood this size, I would have expected at least a 36” range. But then the drawers would have to be reduced in width. This seems a typical problem for most homeowners: bigger appliances or better storage. Also note the glass cook top is not level in the back left corner. Not much else to critique. I really like this space! Bravo to Kitchen Designer Sean Daigle. Also to Monica Brent who skillfully painted the hood. Gorgeous!

Sinks: the simple truth on getting the best sink.

June 18th, 2007 § 7 Comments

The Bottom Line: No pretty pictures here: just chalk full of information you need to know before you buy a sink. See web site links for the photos and spec sheets.

  1. Before going shopping, observe your cooking habits. Measure your existing sink width; include outside dimensions and each bowls inside dimension including depth. How do you use your sink? Do you wash dishes in a double bowl sink? How many cooks? Two water stations are essential for two cooks or for that holiday dining. Do you have place to add a second small prep sink?
  2. Take measurements of what your new sink base cabinet will be. Subtract for the sides of the cabinet to determine what size sink will fit in your new cabinet. If you have any doubts consult your designer. Never order your kitchen cabinets until you are satisfied with the size of your new sink. You don’t want to be disappointed when your designer tells you can only buy a 33″ sink or smaller to fit your design when you were hoping for a bigger sink!
  3. Depth: bowls that have straight sides will net a bigger interior space. Look for Blanco Magnum Series, Blanco Steel Art Series.
  4. Shape: Round shapes net smaller interior space in comparison to its square counterparts. An example of this: Kohler‘s Brookside verses Kohler’s Clarity. If space is limited, Kohler’s Smart Divide is a great solution. Round shape or square shape, it’s all there!
  5. Built in stainless steel drain boards: I personally like this, because it gives a clean drip edge for water to drain into the sink. The draw back, hard water spots once the water dries and another area of stainless steel to wipe down to keep it looking new. See Kohler Prologue Elkay Gourmet series or Oliveri Euroform or Petite or New Petite.
  6. Waste Disposer Compartment: If you are ordering a single bowl sink, you will want to get the food waste disposer located in the far corner and not in the middle of the bowl. If you are ordering a triple bowl sink with the garbage disposal in the middle, much of the feed back from homeowners has been negative and no one has told me they want to replace them with a new one. The biggest complaint is that the extra bowl for the garbage disposal takes away from the size of the usable sink. Secondly, these dedicated bowls for the waste are higher up in the sink and food debris can be whirred right back up at you.
  7. Pick you faucet at the same time you pick your sink. How many holes are on the back ledge of the sink? Count out how many holes you will need to see if it will work with your sink. This is the biggest area of compromise for most people. What will be on your deck? A faucet, a side spray, a hot water dispenser, an air gap for the dishwasher, soap dispenser. Most cast iron sink are pre-drilled for four holes. Drilling holes in cast iron is not a viable option in some cases. Ceco Sinks carry many identical styles to Kohler, American Standard and Eljer, and the appeal is that they may be able to custom drill the holes at an additional fee. Adding holes in a stainless steel sink is much easier. In solid surface sinks, for example, Corian , the holes are drilled in the counter top deck so the number and placement is flexible.
  8. Composting: Do you want a chute in the deck? They are available. Check with the sink manufacturers. An alternate method I prefer that takes up less space is a separate composting bin kept on the counter or under the sink for immediate removal to the composting bin. Remember to remove daily to avoid the fruit fly party that will soon appear even if you forget.
  9. Sink Strainer. Do not order it in plastic. For best wear order a stainless steel strainer. I don’t care if it matches your white, oil rubbed bronze or satin nickel faucet. I am going to be insistent on this point. You will pay more for quality but you will wish you had when you see your powder coated strainer peeling away in a very short time, these cheap plastic powder coated strainers will “ugly out” before they wear out. Stainless steel!
  10. Get a faucet that is proportional to the width of the sink. Make sure when you specify a large sink and a side spray, that the spray reaches onto the far reaches of both bowls.
  11. To under mount or not: You may be fastidious but your spouse or kids not. An under mount sink will have the faucets mounted on the granite or solid surface. This means water will run off onto the counters easier. Especially if someone leaves a wet sponge on the counter. Get a $6.00 suction cup sponge holder mounted to the inside of the stainless sink to resolve this. Stay away from sponge tilt out trays. They rust, won’t close properly overtime, and wet sponges left in close proximity to wood is not a good idea.
  12. Single bowl under mounts side by side with a granite or solid surface rim. If you specify this make sure you recess the solid surface ledge between the two bowls at least 1/4″ inch. You will want to avoid water run off between the two bowls, across the counter and down the floor. “Water wears away mountains” and please do not make your cabinets the victim of water damage. Wipe down spills off your wood surfaces to protect the longevity of your cabinets.
  13. Tile in sinks: This is a great alternative to contain the water on your deck. The faucet gear is mounted on the cast iron or stainless surface. Most people are opting for under mount because of the look with granite counters. But don’t overlook the tile in if you think your family is going to run into problems described in item #11.
  14. Self rimming: pretty upon first site. Problems: several. Wiping down counters into the sink is harder because of the self rim. The rim has a visible caulking joint all around the sink. Tends to be a crumb collector area. Most plumbers will specify a white caulk unless you make sure to specify a matching caulk color. Cast iron rims can show chips more so than other types of sinks.
  15. Corner sinks: They can be the most awkward sinks if not placed close to the front edge. Place no more than 2-3 inches from the front edge of the counter top.
  16. Apron front sinks: Beautiful? Yes. Practical, I have my reservations. Water is my first concern. There is more chance for water roll off onto the face of cabinets, causing what else, but warranty issues on your cabinets. Peeling paint, cracked paint is a result of water damage. Protect your cabinets by wiping them down, be observant of water. Design options: Recess the cabinet doors. Install a ledge between the bottom of the sink and the cabinet doors to catch the water before it drops on your cabinet. Belt buckles can scratch the apron too, scratches on cast iron can be rubbed off but scratches on stainless steel are there forever. Deep apron sinks can give you a back ache. They are mounted 3/4″ or lower depending on the thickness of your counter top and cause the user to reach deeper. Working at the kitchen sink for extended times, you’ll feel the difference.
  17. Faucets: watch out for the following: a) handle rotation front to back. Watch out for clearance: Window ledges or a wall could interfere with the lever in the hot water position. B) handle attached to the side of the spout, could interfere with the next item in the deck. Check the hole spacing available on your sink. Extra thick countertops could pose problems for the plumber. The faucet shank length needs to accommodate the counter thickness. C) Bridge faucets or two handles faucets, watch out to make sure they are accessible for both bowls. With a side spray, you need to make sure it reaches into the far end of the opposite bowl. Swivel Goose neck faucets with a pull down handle are my favorite for ergonomics. The high arc spout makes moving large stock pots in and out of the sink easy. The pull out sprays is longer and the braided hoses are the most durable. Plastic hoses wear down quicker at the connector than do the braided hoses.
  18. New ideas: If you are short in space for a second sink and you and your spouse can benefit from two water sources, consider a large double bowl sink and install two faucets, one for each bowl. This can be handy when you need to drain your pasta water and your spouse is rinsing the lettuce.
  19. Accessories not to overlook: Stainless steel grids protect the sink surface. A good design has the hole built to match the disposal hole. Stainless steel grids last longer than the plastic coated wire grids which tend to rust out and ugly out quicker. The plastic ones are not as expensive to replace if you find your’s has uglied out. Soap dispensers are not high on my list, actually on the bottom of my list. It is the first think to go bad. Once the spring action pump gets gumped and goey, it breaks. By the way, to fill them you remove the spout. I heard of one homeowner who never refilled hers because she thought she needed to unscrew the bottle form the bottom from underneath the sink. Colanders and cutting boards that fit the sink are ingenious for easy prep work! Most of this information can be found in NKBA‘s Professionl Resource Library , Kitchen Planning Volume. Product references and comments are from years of discussions about sinks with my customers.

Sinks: the simple truth on getting the best sink.

June 18th, 2007 § 7 Comments

The Bottom Line: No pretty pictures here: just chalk full of information you need to know before you buy a sink. See web site links for the photos and spec sheets.

  1. Before going shopping, observe your cooking habits. Measure your existing sink width; include outside dimensions and each bowls inside dimension including depth. How do you use your sink? Do you wash dishes in a double bowl sink? How many cooks? Two water stations are essential for two cooks or for that holiday dining. Do you have place to add a second small prep sink?
  2. Take measurements of what your new sink base cabinet will be. Subtract for the sides of the cabinet to determine what size sink will fit in your new cabinet. If you have any doubts consult your designer. Never order your kitchen cabinets until you are satisfied with the size of your new sink. You don’t want to be disappointed when your designer tells you can only buy a 33″ sink or smaller to fit your design when you were hoping for a bigger sink!
  3. Depth: bowls that have straight sides will net a bigger interior space. Look for Blanco Magnum Series, Blanco Steel Art Series.
  4. Shape: Round shapes net smaller interior space in comparison to its square counterparts. An example of this: Kohler‘s Brookside verses Kohler’s Clarity. If space is limited, Kohler’s Smart Divide is a great solution. Round shape or square shape, it’s all there!
  5. Built in stainless steel drain boards: I personally like this, because it gives a clean drip edge for water to drain into the sink. The draw back, hard water spots once the water dries and another area of stainless steel to wipe down to keep it looking new. See Kohler Prologue Elkay Gourmet series or Oliveri Euroform or Petite or New Petite.
  6. Waste Disposer Compartment: If you are ordering a single bowl sink, you will want to get the food waste disposer located in the far corner and not in the middle of the bowl. If you are ordering a triple bowl sink with the garbage disposal in the middle, much of the feed back from homeowners has been negative and no one has told me they want to replace them with a new one. The biggest complaint is that the extra bowl for the garbage disposal takes away from the size of the usable sink. Secondly, these dedicated bowls for the waste are higher up in the sink and food debris can be whirred right back up at you.
  7. Pick you faucet at the same time you pick your sink. How many holes are on the back ledge of the sink? Count out how many holes you will need to see if it will work with your sink. This is the biggest area of compromise for most people. What will be on your deck? A faucet, a side spray, a hot water dispenser, an air gap for the dishwasher, soap dispenser. Most cast iron sink are pre-drilled for four holes. Drilling holes in cast iron is not a viable option in some cases. Ceco Sinks carry many identical styles to Kohler, American Standard and Eljer, and the appeal is that they may be able to custom drill the holes at an additional fee. Adding holes in a stainless steel sink is much easier. In solid surface sinks, for example, Corian , the holes are drilled in the counter top deck so the number and placement is flexible.
  8. Composting: Do you want a chute in the deck? They are available. Check with the sink manufacturers. An alternate method I prefer that takes up less space is a separate composting bin kept on the counter or under the sink for immediate removal to the composting bin. Remember to remove daily to avoid the fruit fly party that will soon appear even if you forget.
  9. Sink Strainer. Do not order it in plastic. For best wear order a stainless steel strainer. I don’t care if it matches your white, oil rubbed bronze or satin nickel faucet. I am going to be insistent on this point. You will pay more for quality but you will wish you had when you see your powder coated strainer peeling away in a very short time, these cheap plastic powder coated strainers will “ugly out” before they wear out. Stainless steel!
  10. Get a faucet that is proportional to the width of the sink. Make sure when you specify a large sink and a side spray, that the spray reaches onto the far reaches of both bowls.
  11. To under mount or not: You may be fastidious but your spouse or kids not. An under mount sink will have the faucets mounted on the granite or solid surface. This means water will run off onto the counters easier. Especially if someone leaves a wet sponge on the counter. Get a $6.00 suction cup sponge holder mounted to the inside of the stainless sink to resolve this. Stay away from sponge tilt out trays. They rust, won’t close properly overtime, and wet sponges left in close proximity to wood is not a good idea.
  12. Single bowl under mounts side by side with a granite or solid surface rim. If you specify this make sure you recess the solid surface ledge between the two bowls at least 1/4″ inch. You will want to avoid water run off between the two bowls, across the counter and down the floor. “Water wears away mountains” and please do not make your cabinets the victim of water damage. Wipe down spills off your wood surfaces to protect the longevity of your cabinets.
  13. Tile in sinks: This is a great alternative to contain the water on your deck. The faucet gear is mounted on the cast iron or stainless surface. Most people are opting for under mount because of the look with granite counters. But don’t overlook the tile in if you think your family is going to run into problems described in item #11.
  14. Self rimming: pretty upon first site. Problems: several. Wiping down counters into the sink is harder because of the self rim. The rim has a visible caulking joint all around the sink. Tends to be a crumb collector area. Most plumbers will specify a white caulk unless you make sure to specify a matching caulk color. Cast iron rims can show chips more so than other types of sinks.
  15. Corner sinks: They can be the most awkward sinks if not placed close to the front edge. Place no more than 2-3 inches from the front edge of the counter top.
  16. Apron front sinks: Beautiful? Yes. Practical, I have my reservations. Water is my first concern. There is more chance for water roll off onto the face of cabinets, causing what else, but warranty issues on your cabinets. Peeling paint, cracked paint is a result of water damage. Protect your cabinets by wiping them down, be observant of water. Design options: Recess the cabinet doors. Install a ledge between the bottom of the sink and the cabinet doors to catch the water before it drops on your cabinet. Belt buckles can scratch the apron too, scratches on cast iron can be rubbed off but scratches on stainless steel are there forever. Deep apron sinks can give you a back ache. They are mounted 3/4″ or lower depending on the thickness of your counter top and cause the user to reach deeper. Working at the kitchen sink for extended times, you’ll feel the difference.
  17. Faucets: watch out for the following: a) handle rotation front to back. Watch out for clearance: Window ledges or a wall could interfere with the lever in the hot water position. B) handle attached to the side of the spout, could interfere with the next item in the deck. Check the hole spacing available on your sink. Extra thick countertops could pose problems for the plumber. The faucet shank length needs to accommodate the counter thickness. C) Bridge faucets or two handles faucets, watch out to make sure they are accessible for both bowls. With a side spray, you need to make sure it reaches into the far end of the opposite bowl. Swivel Goose neck faucets with a pull down handle are my favorite for ergonomics. The high arc spout makes moving large stock pots in and out of the sink easy. The pull out sprays is longer and the braided hoses are the most durable. Plastic hoses wear down quicker at the connector than do the braided hoses.
  18. New ideas: If you are short in space for a second sink and you and your spouse can benefit from two water sources, consider a large double bowl sink and install two faucets, one for each bowl. This can be handy when you need to drain your pasta water and your spouse is rinsing the lettuce.
  19. Accessories not to overlook: Stainless steel grids protect the sink surface. A good design has the hole built to match the disposal hole. Stainless steel grids last longer than the plastic coated wire grids which tend to rust out and ugly out quicker. The plastic ones are not as expensive to replace if you find your’s has uglied out. Soap dispensers are not high on my list, actually on the bottom of my list. It is the first think to go bad. Once the spring action pump gets gumped and goey, it breaks. By the way, to fill them you remove the spout. I heard of one homeowner who never refilled hers because she thought she needed to unscrew the bottle form the bottom from underneath the sink. Colanders and cutting boards that fit the sink are ingenious for easy prep work! Most of this information can be found in NKBA‘s Professionl Resource Library , Kitchen Planning Volume. Product references and comments are from years of discussions about sinks with my customers.

Bath Inspirations

June 18th, 2007 § Leave a Comment

Fabulous bath concepts from around the globe. Here are my favorites and I pay to homage to the Designers and Architects who built outside the box.

To create a dramatic entrance to the bathroom, interior designer Brandi Hagen placed an antique bench seat in front of a large Botanical Beach Grass Lumicor panel. Colors and materials were chosen to create a zen-like simplicity.

Creating a fun space that children actually look forward to using is surely a bath time winner, by Richard Behr architect and Jolie Korek, Interior Designer. Good color choices with Jerusalem Gold Stone and Mosaiac Glass Pebble Accents.
As seen in Trends Ideas

For the art collector. The freestanding Napoli is not just a functional tub – it’s a sculptural installation. Edward Taylor, the president of Victoria & Albert’s US headquarters, says the Napoli’s ultra-contemporary design is the result of more than a decade of freestanding bath development, and is inspired by the pure organic form of an egg. The tub is a 75-inch-long, low-slung ovoid shape that provides ergonomic comfort and cocoons the bather.


Rationing hot water is a thing of the past with the Noritz tankless hot water system. Water is heated as it is used, so there is no chance it will run out. This house was designed by Dick Clark Architecture featured in Trends.

Trends volume 2205
The mixture of limestone tiles creates a light and bright bathroom that is rich in soft textures.

Architect : Robert Baum, LLP, Baum Thornley Architects (San Francisco, CA)

A translucent glass wall provides the central feature of both bathroom and bedroom. The shape of the mirrors was important, given their proximity to the glass, and this form is echoed in the stainless steel basins beneath. Soft focus from Bathroom Trends volume 2205

This bathroom by David Howell Design is created almost exclusively out of Jerusalem Gold limestone.

An entire wall of this bathroom, designed by architect Lindy Leuschke, is tiled in purple, blue and gray glass mosaics. These mosaic tiles add a strong, rich element to the otherwise simple decorative scheme.

This master bathroom, designed by architect Mark Singer of Laguna Beach, California, looks out onto a private courtyard. As well as the shower, the bathroom also features a 3ft-deep, Japanese-style soaking tub that is mirrored by a spa pool in the courtyard.

Bath Inspirations

June 18th, 2007 § Leave a Comment

Fabulous bath concepts from around the globe. Here are my favorites and I pay to homage to the Designers and Architects who built outside the box.

To create a dramatic entrance to the bathroom, interior designer Brandi Hagen placed an antique bench seat in front of a large Botanical Beach Grass Lumicor panel. Colors and materials were chosen to create a zen-like simplicity.

Creating a fun space that children actually look forward to using is surely a bath time winner, by Richard Behr architect and Jolie Korek, Interior Designer. Good color choices with Jerusalem Gold Stone and Mosaiac Glass Pebble Accents.
As seen in Trends Ideas

For the art collector. The freestanding Napoli is not just a functional tub – it’s a sculptural installation. Edward Taylor, the president of Victoria & Albert’s US headquarters, says the Napoli’s ultra-contemporary design is the result of more than a decade of freestanding bath development, and is inspired by the pure organic form of an egg. The tub is a 75-inch-long, low-slung ovoid shape that provides ergonomic comfort and cocoons the bather.


Rationing hot water is a thing of the past with the Noritz tankless hot water system. Water is heated as it is used, so there is no chance it will run out. This house was designed by Dick Clark Architecture featured in Trends.

Trends volume 2205
The mixture of limestone tiles creates a light and bright bathroom that is rich in soft textures.

Architect : Robert Baum, LLP, Baum Thornley Architects (San Francisco, CA)

A translucent glass wall provides the central feature of both bathroom and bedroom. The shape of the mirrors was important, given their proximity to the glass, and this form is echoed in the stainless steel basins beneath. Soft focus from Bathroom Trends volume 2205

This bathroom by David Howell Design is created almost exclusively out of Jerusalem Gold limestone.

An entire wall of this bathroom, designed by architect Lindy Leuschke, is tiled in purple, blue and gray glass mosaics. These mosaic tiles add a strong, rich element to the otherwise simple decorative scheme.

This master bathroom, designed by architect Mark Singer of Laguna Beach, California, looks out onto a private courtyard. As well as the shower, the bathroom also features a 3ft-deep, Japanese-style soaking tub that is mirrored by a spa pool in the courtyard.

Singing in the Rain

June 18th, 2007 § Leave a Comment


Kohler introducing low-profile SoundTile speaker allow you to enjoy your favoritemusic or Internet radio stations through your DTV™ II interface.

SoundTile
K-8033-BN speaker in Vibrant® Brushed Nickel.

Where Am I?

You are currently viewing the archives for June, 2007 at Kitchen Design Notes.